Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
NEWS
The manufacturer of axial pump impellers Alloy 20 material will show you what precautions should be taken when using the axial flow pump
Published:
2021-09-15
The axial pump impellers Alloy 20 material manufacturer tells you that the axial flow pump impeller is equipped with 2 to 7 blades and rotates in a circular tubular pump casing. The pump casing above the impeller is equipped with fixed guide vanes to eliminate the rotational motion of the liquid and turn it into axial motion.
The axial pump impellers Alloy 20 material manufacturer tells you that the axial flow pump impeller is equipped with 2 to 7 blades and rotates in a circular tubular pump casing. The pump casing above the impeller is equipped with fixed guide vanes to eliminate the rotational motion of the liquid and turn it into axial motion, and convert the kinetic energy of the rotational motion into pressure energy. Axial flow pumps are usually single-stage, and a few are made into two-stage. The flow range is very large, ranging from 1.8 to 3.6 million cubic meters per hour; the lift is generally below 20 meters. The following axial pump impellers Alloy 20 material manufacturers will take you to understand the precautions when using the axial flow pump.
Precautions:
1. The manufacturer of axial pump impellers Alloy 20 material tells you that during the trial run, you should check the connection parts to ensure that there is no looseness in each connection part.
2. The electrical appliances and instruments are working normally; the pipelines of oil, gas and water systems must not leak; the pressure and hydraulic pressure are normal.
3. Always check whether there are floating objects near the water inlet to prevent the water inlet from being blocked.
4. The temperature of the rolling bearing of the axial flow pump should not exceed 75 degrees.
5. Pay attention to the sound and vibration of the pump at any time, and immediately stop the pump for inspection if any abnormality is found.
6. The manufacturer of axial pump impellers Alloy 20 material tells you that the temperature of the oil in the gearbox should be normal.
Key words：
Related Information
CONTACT US
E-MAIL:
FAX:
ADD:
No.368,Xinshi North Road,Shijiazhuang City,China